Lotos Plasma Cutter Reviews: Which One to Choose?

Is it accurate to say that you are searching for quality cutting devices of driving makers for your independent venture or DIY works? At that point, you have to recognize what plasma cutting is.

Plasma cutting makes cutting metal rapidly exceptionally straightforward if you work with metal you ought to have one! This is a process used to cut through stainless steel and different metals of various widths making use of plasma burn.

Not sure which one to get? Down below all the Lotos Plasma Cutter Reviews. Why Lotos, you might ask. Keep on reading to find out.

Among a hundred brands, you can rely upon Lotos Innovation. Regardless, whether you’re choosing to purchase another plasma shaper or supplanting the bygone one, you may consider distinctive classifications of Lotos Plasma shaper as per your need.

Peruse our surveys and settle on a savvy purchasing choice on the plasma shaper.

In a Hurry? Check Our Top Picks of Lotos Plasma Cutter Review

How Good are Lotos Plasma Cutters?

Lotos has been in the matter of amassing plasma cutters, welding machines, and decorations for a long time. Lotos plasma cutters are genuinely moderate while the associations have exceedingly esteemed plasma cutters. How they are reasonably evaluated does not suggest that they deal on quality.

These machines appear on most Lotos plasma shaper reviews since they are known for adequacy, sturdiness and for being anything but difficult to utilize.

Their Plasma cutters are organized basically for master. Similarly it’s for non-capable customers as well to pass on a dependable and master assessment execution on a wide extent of metal surfaces and materials.

Make an effort that you do not need to wait on your inspiration to buy a Lotos machine this New Year. Instead, the clarifications behind which you should buy Lotus plasma shaper are given underneath:

  • Lotos things, especially plasma cutters have achieved affirmation as a praiseworthy hotspot for the moderate buyer which is similar to mechanical plasma cutters.
  • These plasma cutters are joined with the latest headways like high-repeat Inverter advancement (MOSFET), IGBT development, PWM, and so forth.
  • These plasma cutters offer an anticipated first-class cutting result on a wide extent of conductive materials and surfaces.
  • Most of the models of Lotos are fit for giving rich features to Mechanical, master and DIY customers.
  • Execution, easy usability, transport ability, steadfast quality, or anything you want to get from a plasma shaper, you can trust Lotos.

Coming up next, a review on those Lotos Cutters where you could take a gander if in case you are searching for a strong thing.

1. LOTOS LTP 5000D Review

Everybody is interested to know whether the amazingly low valued LOTOS LTP5000D plasma shaper merits purchasing and adding to their carport. Let’s be honest. Everybody needs a plasma shaper that offers as much ability and highlights as the LTP5000D accomplishes at the cost.

It’s an easy decision! Pause, how about we take a gander at the better subtleties and check whether this thing is extremely worth purchasing.

Things Worth Mentioning

This is a machine made in China, and it’s well known because of its low cost and incredible cutting capacity. The way Lotos can create such an able machine for such a low cost is by utilizing lower quality materials which you would discover in progressively costly machines.

The LTP5000D is made for people who utilize their machine in a non-proficient setting. If you are the end of the week warrior and plan to handle ventures like building a move, confine for your Jeep.

At that point, the LTP5000D will work incredibly for that, and you will be very content with the usefulness you get at the cost.

Accordingly, Lotos machines are extremely modest. With the 1-year guarantee, you ought to most likely get a working unit for a periodic use. Numerous weekend warriors possess this machine and are content with it.

Pros

  • Value point that performs well
  • Overly modest contrasted with contenders.
  • The machine has all that you have to begin straight out of the crate

Cons

  • Assemble quality isn’t the same as in the US

2. Lotos Plasma Cutter Review (LT3500)

This is definitely a must have, cutting has never been easier. LT3500 is one of the best there is and down below is everything that you need to know about the product. Why wait then, lets jump into the good stuff.

Things Worth Mentioning

Lotos LT3500 is made to be used for cutting light tasks. This piece is the smaller plasma shaper that one can find in markets. While this incredible cutter can easily cut ten millimeters metal with fifteen millimeters division thickness, this can be a great choice for the DIY specialists concerned with cost.

The LT3500 can be a brilliant decision for home DIY occupations and light obligation private venture ventures. The pre-introduced NPT 1/4″ industry type D plug enables you to fast interface with your air blower by utilizing the stand coupler existing on your air blower. The entire machine can be set up rapidly in 1 min.

Cutting capabilities are 2/5″ perfect clean cut and 3/5″ greatest severance cut. Appropriate cutting for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, and so forth.

Bundle includes control supply, cutting light, consumables, ground clasp, Pre-introduced NPT 1/4″ industry type D attachment and Air channel controller.

Pros

  • Incredible cutting limit
  • Automatic double voltage ability
  • Efficient and clean slices through an assortment of metals
  • Compact and lightweight plan
  • Safe and simple to utilize
  • Affordable cost

Cons

  • Doesn’t accompany a 110V braid
  • Not intended for rock solid use
  • No assurance that there’ll be new parts later on
  • Short guarantee

3. Lotos LTPDC2000D

This is an inventive item. It is a standout amongst the best TIG welder machines accessible and available today. This item is a multipurpose machine, and it makes DC TIG/Stick conceivable. Moreover, it makes plasma cut conceivable with a versatile machine.

It is viewed as a multipurpose welder since it can join three capacities in one. The capacities incorporate 200A stick welder, 200A DC TIG welder, just as 50A pilot Arc shaper. The machine is fit for doing distinctive metal slices going up to ½ inch. This is conceivable with its 50A pilot curve.

Things Worth Mentioning

The accompanying Lotos audit will influence you to comprehend about the item altogether.  Along with these lines, it will help you to choose which item to purchase.

The Lotos audit about the development of this welding unit uncovers that this machine is produced using Robust Infineon IGBT Power Drive framework. Dissimilar to numerous different machines accessible in the present market, this specific development is putting forth the machine with the more drawn out life expectancy.

This machine isn’t just double voltage type, yet additionally includes a double recurrence (50/60 Hz). It requires a higher voltage of around 200 to 220V AC capacity to be worked. That is the run of the mill control for any high limit welding machine.

Various audits on Lotos demonstrate that this specific element of this welding unit would give you the upside of cutting on corroded surfaces without the requirement for tidying up.

Pros

  • Is profoundly strong
  • Can weld by making more grounded
  • Incorporates three capacities in a solitary unit
  • Light weighted and convenient

Cons

  • The welding leads are very little

4. Lotos CT520D Plasma Cutter Review

Overwhelming experience can be defined by choosing a plasma cutter. It doesn’t help that the majority of them will have a hefty price tag, even the cheaper plasma cutters or welders can run you hundreds of dollars.

The last thing you want to do is spend all that money and get a product that doesn’t meet your standards or the one that doesn’t even help you to finish that important job.

Things Worth Mentioning

This small machinery is capable of doing a ton. The fifty-amp cutter easily cuts through half-inch components. Moreover, it works fairly well against three-fourth and inch components. It effectively cuts through aluminum, copper, and steel.

The machine is DC-only being one of those TIG welders. As a result, you can’t look at all welded aluminum. It has a precise foot pedal as well as the torch control which is manually turned.

However, a small inconvenience is that the pedal is not included in the welder box. Stick welder allows building deep weld pool which is a fifteen to two hundred-amp choice and a constant shape.

Pros

  • Something other than a Plasma Cutter
  • Versatility and Quality
  • Cutting Ability

Cons

  • Doesn’t accompany an amperage control foot pedal
  • Doesn’t accompany the 120V ponytail

Common Lotos Plasma Cutter Problems and Solutions

It’s bizarre that you’re utilizing an instrument and never face any issue. When you work with a plasma shaper, usually you’ll confront a few issues, and you require the moment arrangement. Here are some regular plasma shaper related issues and their answers.

Problem 1

What wasn’t right with my plasma shaper?

  • Solution

The fan started, the power drove turned on, air blew through the light when the trigger was crushed. Nevertheless, the issue was there that there was never a roundabout section but a wore out component(s) inside.

Hence, simply open it up, release the power, and search for broken parts. Probably the most well-known ones are blown diode, the spilling capacitor (overflowing out the best), consumed resistor, broken transfer, broken chip/MOSFET (lump missing from the chip).

Problem 2

Is a drag container (shield) essential when running 30 amps or less plasma shaper?

  • Solution

You need a drag tip on the off chance that you are going to drag. Couldn’t care less about what amps you are running.

Problem 3

I see anomalies in the cut surface, and these seem just in one pivot. What can be a conceivable reason?

  • Solution

The reasons may fuse too high gas stream or hurt consumables.

Problem 4

The plasma shaper isn’t working, and the resistor gets hot.

  • Solution

Evacuate the spread and assess within the lower front piece of the unit. Hold the light change to check whether you are getting a sparkle inside the unit there. If in case you don’t perceive any sparkle inside the unit while holding the light trigger, something has flopped on your lower board there.

Look at the resistor which is situated behind the curve. Expel the board unsolders and introduce the enhanced one. It’s expectated to work accurately.

Frequently Asked Questions

Q: Can You Get an Air Compressor Built into a Plasma Cutter?

In case you buy a model without a built-in air compressor, you will need to buy the air compressor separately,. In the mean time, you are going to have a look for the one that’s most compatible with your device.

Not all compressors work the same. You will have to buy one that matches the requirements of capacity, pressure, etc. So make sure to check all that info before you buy a separate air compressor.

Q: I Want More Electrodes and More Tips. Where Do I Look?

Go to any shop specializing in these products, and you will find all this extra stuff. However, if you want the right ones that cater to your specific needs, visit the website of the manufacturer. There you’ll get the right materials you need from a certified dealer.

Q: How Do Plasma Cutters Work, and How Do I Use Them?

You’ll be amazed when you discover that it is so natural to utilize it, yet you ought to gain proficiency with a few principles. If you might want to utilize your shaper like a genuine expert, directly pursue these means:

  1. Make sure to have the main part of the machine turned off before plugging in.
  2. Attach the air compressor.
  3. Has the ground clamp plugged in?
  4. Turn on the machine and then adjust the current.
  5. Now do your cutting.
  6. Cut the material you need.
  7. Turn on the machine and pull off the ground off.
  8. Switch off the air and wrap up the cords.

Conclusion

Lotos Plasma Cutters offer proficient, simple, spotless and speedy cutting. Regardless of whether you are a do-it-without anyone else’s help like a welder or an expert, any of these Lotos Plasma Cutter reviews explored will meet your necessities.

You will get a great machine worth your buck if you pick an yone from this brand.

Leave a Comment