Welding can easily turn into a nightmare from the artistic and creative job that you are considering it to be. This usually happens only when a welder is not careful or didn’t equip himself with adequate gears.
If you are a welder reading this, Man you have a fantastic job, but don’t let your experience make you arrogant. Wearing proper safety gear is the key to your healthy and wealthy life.
Out of all the necessary gear, you must ensure that you get the best welding boots available in the market.
Why welding boot, you might be thinking? As you can easily put on any shoes and head to work!
You are the delusional man! To get a complete understanding of why you need to buy welding boots and which ones to get, keep on reading.
In a Hurry? Take a Look at Our Top Picks of Boots for Welders
|Dr. Martens Men's Ironbridge MG ST Steel-Toe Met Guard Boot||317 Reviews||from $144.95||Check Price on Amazon|
|Ariat Men's Sierra Wide Square Steel Toe Work Boot||265 Reviews||from $134.50||Check Price on Amazon|
|Iron Age Men's Ground Breaker IA5016 Work Boot||79 Reviews||from $69.97||Check Price on Amazon|
|Timberland PRO Men's 53530 8" Metguard Steel-Toe Boot||230 Reviews||from $146.90||Check Price on Amazon|
|Thorogood Men's GEN-FLEX 6-Inch Lace-Toe Composite Work Boot||925 Reviews||from $164.94||Check Price on Amazon|
What To Look For Before Buying A Pair Of Welding Boots?
Below are the key considerations while choosing a pair that will serve you for long;
The ‘steel toe’ feature is the first and foremost feature that a pair of welding workboots must have as it protects the person from falling and flying objects, punctures or cutting hazards and electrical hazards.
Many workplaces have made it mandatory for the workers to wear boots with the ‘steel toe’ feature installed.
The durability factor is one reason why you should not settle for shoes when you are into welding. In this sector, ordinary shoes tend to wear out a lot. In a month or two, you will often find the sole to give up.
On the other hand, a welding boot has durable, high-quality stitching that makes it go much further. Quality welding work boots are a must to keep your feet safe when at work.
The leather of an object is waterproofed to ensure that water does not penetrate the surface. The activity of breathing is reduced when water is drawn in.
An utterly wet jacket or a thoroughly wet shoe is no longer breathable. The leather objects don’t get heavy due to penetrating water if the leather is waterproof. The stain sensitivity caused by watermarks is also reduced.
A Metatarsal Guard
The metatarsal parts of the welding boots provide unprotected metatarsal bones with the greatest protection. It is important to wear safety-toe shoes with metatarsal guards or metatarsal work boots, as the metatarsal bones of the foot are highly vulnerable to injury.
The front of the foot sticks out of the body and invites a rolling or falling object to collide with this unprotected part.
Heat Resistant Outsole
The heat-resistant outsole is also crucial because the temperatures you work in as a welder can deform the sole of the boot and make it uncomfortable.
It’s imperative that your boots are comfortable when working on your feet all day. Because if your feet feel good, you will also feel good and being in shape helps you improve your performance to your best.
Our Picks of the Best Welding Work Boots
You’ve had enough of wasting your money on shoes that don’t help and are finally convinced that you, as a welder, badly need a pair of welding shoes. What now? You don’t know where to look. Say no more.
In the case of welding boots, you need to focus on what can be a good investment for your long-term job. After rigorous research and evaluation, we’ve listed some of the best welding boots of 2019.
1. Martens Men’s Ironbridge MG ST Steel-Toe Boots
- Water resistant full-grain with a leather ballistic mesh padded collar
- Removable Smartmask insole
- Slip resistant to oil, fat, petrol and alkali with a standard wood shank
If you’re a serious welder who wants to be comfortable and safe at the same time, Dr. Martens Men’s Ironbridge MG ST Steel-Toe Boots are the ones for you. The durability is just out of the world. Since these boots have a strong sole, they won’t let you slip.
Additionally, these boots have double stitching, heavy-duty laces, and eyelets, and these features make the shoes long-lasting. The uppers of these boots are made of full-grain leather and water-resistant.
The boots are malleable, and the removable insole and ankle padding ensures your comfort. And finally, the steel toe cap feature is there to protect your feet from impacts or hazards.
2. Ariat Men’s Sierra
- Western-style work boot with elaborately stitched shaft and protective square steel toe
- ATS Advanced Torque Stability technology with composite forked shank
- Mesh lining
- Safety toe is ASTM F2413-11 M/I/75 C/75 EH rated
- Oil- and slip-resistant outsole
The Ariat Sierra boots are mostly known for its water and oil-proof features. It is one of the most popular boots out there. The good things about these boots are they are tough and hard-working pull-on boots that are made for all conditions.
Its waterproof pro construction provides an impermeable waterproof barrier, and the Goodyear welt construction ensures stability and superior toughness.
The Advanced Torque Stability (ATS) footbed cushions and supports feet as you move. ATS technology with a lightweight, composite forked shank provides optimum stability and comfort during the day. Finally, the high-heat duratread rubber outsole ensures their water, oil, slips and high-heat resistance.
3. Iron Age Men’s Ground Breaker
- ASTM F2413 Safety Standard Compliant
- External Metatarsal Guard Protection
- Electrical Hazard Protection
- Kevlar Stitching
- Goodyear Welt Contruction
The Iron Age boots are one of the most rugged and the cheapest work boots out there. These boots are genuine full-grain leather. Also, the 6″ external guard on these boots adds another precautionary layer by protecting the metatarsal bones in the arches against any damage caused by rolling or falling objects.
It also helps prevent the development of excessive sweat. The Iron Age boots also protect against wetness with mesh lining. This mesh lining helps wick moisture away.
Besides this, the other good features include removable insole to provide you with all-day odor-fighting comfort, electrical hazard protection, genuine leather upper resisting wear-and-tear, etc.
4. Timberland PRO Men’s 53530
- Met Guard;Waterproof
The Timberland PRO Men’s boots are one of the products that you, as a welder, will love due to its great features.
Metatarsal guards are the guards that offer the greatest protection for the feet. The metatarsal guards of these boots are both asymmetrical and hinged, and so they can protect your feet whether you’re crunching down or bending.
They’re very comfortable compared to most welding boots in the market. The leather that has been used to make these boots is Ever-Guard leather, and it’s also water-resistant.
Due to the use of Kevlar thread, durability and quality of the boots are outstanding. The steel toe caps used in these boots are pleasant and spacious which provide superior comfort by protecting from impact and heat whether you’re outdoors or indoors.
Furthermore, these boots offer secondary underfoot protection against electrically powered live circuits and drives. Lastly, since the soles are rubber-made, you will not slip on wet surfaces.
5. Thorogood Men’s GEN-FLEX 6-Inc
- GEN-flex2 outsole
- Goodyear storm welt construction
- EVA Cushion Flex Insole
- Toe Protection: Composite Safety Toe
- Removable single-density polyurethane footbed
Thorogood Men’s GEN-FLEX boots are known for their super ruggedness and also for other features. These boots are very wisely designed.
First, there are the rugged oiled uppers made up of full grained leather which prevent damages from impacts.
The rubber toe is abrasion-resistant, and so the side bumps are soaked and hence, they can absorb the damage.
The other great aspects of using these boots are – waterproof, loads of cushion for superior comfort and the cushioned insoles are removable, compression molded midsole, comfortable mesh lining.
6. Timberland PRO Men’s TiTAN 26078
- The Timberland PRO TiTAN Waterproof 6" Alloy Safety Toe work boot is the reliable choice for wet-weather protection, work-area protection, and underfoot comfort.
- Timberland PRO
- 7 W US Men
- Dark Mocha Full Grain
Timberland boots are one of the best welding work boots in the market. They offer you a shielding work design in addition to being waterproof. These boots are slip, oil and water-resistant and their six-inch leather uppers encase your ankle and upper foot area.
The footbeds are made up of waterproof membrane and premium leather. These footbeds regulate temperature, thus making these boots excellent for you to use in indoors and outdoors alike.
The boots have been treated with an antimicrobic material, and so the boots remain odorless, and your feet remain comfortable. These anti-skid boots deliver outstanding cushioning.
A Polyamide dispersal bit is there to add flexible support and torsional rigidity which means your arch support will not compromise mobility. There are also thin titanium mixture toecap guards to protect your toes from getting hurt.
7. Caterpillar Men’s Revolver Pull-On Steel-Toe Boots
- Slightly distressed steel-toe boot in full-grain leather construction
- Dual pull handles with contrast logo patch
- Slip-resistant outsole
The Caterpillar Men’s Revolver boots’ construction is relatively simplistic, and this may fool you. But rest assured, these boots are one of the best boots out there.
The high-quality leather ensures that the boots last for a very long time. Furthermore, the rubber soles make them slip-resistant.
The construction looks very fashionable because of the single stitch design with GoodWelt construction. The grain leather and the durability keep these boots in competition with other good boots in the market.
In any weather, be it raining or snowing, these boots provide the same level of comfort. Since they look smart and stylish, you can wear them anywhere. The boots have a steel toe, and so there is electric shock resistance.
8. Georgia Boot Men’s G4432 Work Boot
- Full Grain Leather
- Steel Shank
- Fully Lined Breathable Moisture Wicking Material
- Comfort Core Insole
- 11" Height
These pairs are mostly known in the market for their cutting-edge technology to provide comfort. The Georgia boots have no laces, and so as a welder, you don’t have to worry about covering them.
Also, you can take off the boots in no time and pull on them. On top of that, your feet will remain dry and warm when you’re working because these boots are completely lined with moisture-wicking material that’s breathable.
The SPR leather that is used in these boots is 2 and a ½ times more abrasion resistant and 3 times stronger than conventional leathers, and so it is barnyard acids-resistant and pasture-proof.
The boots are equipped with a heavily fortified defense against water, but air can get in. More so, its sole and the upper are sewn together through a flexible, strong stitch creating greater durability.
9. Stanley Men’s Dredge Steel-toe
- Work shoe with Chelsea-boot styling featuring elastic side gores and pull-on loops at opening
- TPU toe cap and heel counters for reinforced protection and durability
- Moisture-wicking lining
- Removable EVA insole with additional EVA cavity for excellent cushioning
- Steel shank
If you’re looking for a pair of boots that has good support, easy comfort and lightweight duty, the Stanley Men’s Dredge boots are the ones. For a pair of boots that will give you a different feel for long term-wear, these low-top full-grain leather work boots that will give you that.
As they’re created in the Chelsea style, you can easily slip the boots on. The removable EVA insole along with additional EVA cavity is there so that you can structure the right amount of cushioning with your foot. The boots are also equipped with a slip-resistant outsole and a sturdy heel.
Lastly, sweat build-up is prevented when you’re on your feet all day by the lining of the boots.
10. Caterpillar Men’s Second Shift
- Steel-toe work boot in rugged leather featuring plush collar and tongue with logos
- Hex-shape grommets with speed lacing at shaft
- Oil-resistant traction outsole
- Nubuck leather or pull up leather nylon mesh lining provides added breathability and comfort
- Steel shank for added support and stability
The Caterpillar Men’s boots are one of those pairs that ensure toughness and comfort at the same time. These boots can protect you from the severe electrical hazard (up to 600V), and the Goodyear welt construction renders you with the maximum durability along with forefoot flexibility.
The nylon mesh lining is there for additional breathability and comfort while the Climasphere™ insole provides your foot with comfort through its built-in breathability feature.
For additional stability and support, there is steel shank, and the T3 rubber outsole is slip-resistant, and so it minimizes the possibilities of you falling and slipping on low traction surfaces.
Professional welders are always at risk in their jobs. The instruments that they use for welding on a regular basis put out sparks, heat, metal, and fumes.
Hence, they remain exposed to these threats for a significant portion of the day. And this is why finding the best welding boots is necessary for them.